The inter mix / carbonator are a fully automatic machine with automatic water level and Co2 pressure controls. All tanks, including pre carbonation and carbonator tanks, pipes and all parts coming in contact with the product are made of stainless steel. The pre carbonation and carbonation tanks are insulated to avoid temperature loss. The gauge glass is provided on the tanks for level indications. The base and electrical panel of the machine is also made of stainless steel. All electrical and electronic controls are made of standard company
The water is taken to the first tank, where the deaeration is done. The water is then taken to the proportionate water holding tank and the syrup is taken to the proportionate syrup holding tank in 1:5 ratio. Then the automatic control, transfer the water and syrup to the beverage tank, where the mixing takes place. The beverage is then circulated through the P.H.E. of the chiller for chilling the beverage up to 4 deg. Cent. The pre carbonated beverage is then taken to the carbonation tank by the high pressure pump, where a desired pressure of Co2 (up to 6.5 Kg/cm2) is maintained. The water is given a sliding path where the Co2 gets dissolved in to the water. The desired gas volume is maintained by the Co2 pressure controls and water flow / temperature. The water levels in all the three tanks are automatically controlled by water level controls. The out let of the carbonator is connected with the filler by S.S. pipes.