1. Combined polypropylene membrane filter plates are the newest series products in China that are developed by integrating all our intellectual properties with various patent techniques;
2. The recipes for production adopt imported polypropylene raw materials. The membrane has good chemical and fatigue resistances . This filter plate is produced in the special structure and made of special materials, ensuring the good membrane elasticity and super-long compression travel to produce thin filter cakes with low water content rate;
3. Medium feeding mode to use more materials for filtration. Completely draining structure and fast filtration speed, cross washing and good washing effects. Reasonable filtration, compression and washing can shorten the handling cycle and reduce handling water consumptions greatly.
4. The highest pressure is 1.6Mpa under normal temperature. The compressed air or high pressure water is used as a compressed medium.
5. The membrane has a long life. The combined structure makes it easy to replace the membranes and reduce the operation and maintenance costs of the equipment.
6. The membrane sealing rings are made of various materials and suitable for different materials.
7. The membrane clamps at the feeding hole are made in metal or non-metal structure and suitable for different materials.
8. The equipment adopts various interlocking safety measures to ensure the safety of compression system.
Select the filter cloth clamps for support on the filter plate to balance the pressure on both sides of the plate, prevent bad-flowing materials from blocking the feeding hole, keep the plate thickness even and avoid the damages of filter plate or membrane plate.