Hanmi Electronics Co.,Ltd

HM II 90-ES is an edge position controller that is made up HM-E sensor of excellent edge detection,amplifier and hydraulic unit. *The sensor, which use LED lamp of high brightness & detecting element (CDS), excel in detecting translucent
& opaque objects *It is the most suitable for detection the edge in printing,coating & electronic machines
*It is not only quick in the adjusting speed but also
control the line speed by max 380m/min very precisely,
according to installation condition (Fast type : 600m/min).
*Cutting error : below +-0.25
(It can control within +-0.1mm according to installation condition)

HM-204L-H, newly released model,installed the integrated board that designs to help be compatible with various sensors.
Accordingly, this model excels in detecting the edge
and the line pattern. *It can connect with local box that control remotely (option)
*It can apply to HM-E,HM-BA,HM-LED,HM-EU30&sensor
*The function of alarm for separation (option)

HMII90-LS is a hydraulic controller that can control precise
position of the edge by amplifying the edge & the line pattern with HM-LED sensor to send it to hydraulic servo valve.
This model perfectly settled the separated phenomenon by disconnection of lamp by using semi-permanent high brightness LED at the present (It used a tungsten lamp in the past). *Line Follower Sensor, which use the LED lamp & the detection element (CDS), excel in detecting & resolving
the line & color of register printed on the web optically.
*It is the most suitable for detecting the edge & line pattern in slitter machine & others.
*It precisely controls the adjusting speed (0.01 sec) up to 380m/min
*Cutting error below +-0.25
(It can control within +-0.1mm according to installation condition)

HMIII-BS is an edge position controller that is composed of beam sensor of an infrared method regardless of disturbance light, amplifier and hydraulic unit. *It excels in detecting the transparent and opaque objects.
*It is the most suitable for detecting the edge in the printing, coating and electronic machines.
*It is not only quick in the adjusting speed but also control the line speed by maximum 380m/min very precisely according to installation condition(Fast type: 600m/min).
*Cutting error : below +-0.25(It can control within +-0.1mm according to installatino condition)
*It detects the edge of paper, film, rubber, textile and others that use in the coating & laminating machine