The most powerful range in the uk up to 60 danm off the shelf. Brand new electromagnetic clutch and pump assemblies are commonly used in marine, agricultural, offroad and general industrial applications such as remote hydraulics in service trucks, boats, trucks with automatic transmissions,fram tractors and snow ploughs.
During assembly please make sure there is no oil or grease traces on the pulley surfaces which must be completely dry and clean.
Running in of the full range of electromagnetic clutches is required to obtain the desired rated torque value. Running in is carried out by engaging and disengaging clutch at high speed several times with the pump in the unload position.
When assembling the electromagnetic clutches with any front driving flange please check for correct coupling alignment,but do not exceed rated torque because this would cause slippage of the contact surface where the belts are located. This stage must not last more than 5 seconds as coils within the clutch will burn out.