HeliBond cementitious grout is a high performance, non-gassing, thixotropic cement based grout, that has been engineered for bonding metal components into common masonry-type substrates including brick, stone, pre-cast concrete, blocks and more. HeliBond is the main bonding agent used in the Helibeam system and is suitable for injecting with a hand operated or pneumatic applicator.
HeliBond is supplied in a pail containing two packs of a dry powder and two containers of liquid, to make a total of either 3 or 4.5 litres of injectable grout depending on the chosen pack size. A smaller pail containing one bag of powder and one container of liquid, ready-to-mix to make 1.5 litres of grout is also available for smaller applications.
The HeliBond formulation, which includes an expansive system to compensate for shrinkage in the hardened state, develops almost half of its fully cured compressive strength after 24 hours.
Features and Benefits
The liquid component should be emptied into the clean pail before introducing the powder. A mixing paddle attached to a low speed rotary drill should be used to ensure a complete blending. During this operation the HeliBond may appear to dry, but if the mixing is continued the correct consistency will be produced.Application
Apply HeliBond with either a hand held manual or pneumatic pointing gun...Read more
Fit a Helifix stainless steel pointing nozzle when crack stitching. Fit a long series Helifix pinning nozzle when installing CemTies.Cleaning
Clean HeliBond tools and equipment with water following use. Hardened HeliBond material may only be removed mechanically.
Pre-packaged, high performance, pumpable, non-shrink, cementitious grout. In-Pakt Precision Grout is a cement based, non-metallic, non-shrink grout ...view details
Cembed is a pre-blended cementitious mortar which contains a special shrink compensating agent. Uses Cembed is a pre-blended shrink compensated ...view details
Sopro DF 10 Flexible Designer Tile Grout is a strong, flexible, rapid-set, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for ...view details
sending enquiry ....