Member
Since
4
Yrs
Heltos Ltd.
Jana Zizky 252
Slavonice-37881, Czech Republic
Contact Supplier

Mounted Drill Machine

Next Product
FOB Price : Get Latest Price

Drilling CANIS a VEGA are next a new type of drilling machine HELTOS company, which is traditional producer bench and pillar drilling machines. Drilling machines of the range CANIS and VEGA are designed fro drilling, reaming and thread cutting in both single-part and series production.
Mentioned drilling machines have infinitely variable of revolutions, which is at type CANIS ensured by variator and by type VEGA by frequency converter. The headstock is solid complex, which ensure heavy duty frame and operational reliability.
Drilling depth is setting on millimeter scale. The spindle is seating in accurate ball bearings, spiral spring the spindle return in the upper position. The headstock and worktable are vertically adjustable and revolving 360°on the pillar. Electric equipment is concentrated in box on the side of the machine. By the help of contactor is drilling machine protected again spontaneous run-up after volts-drop. Both types are in bench design and pillar design.

Send Enquiry
Mounted Drill Machine
FOB Price :Get Latest Price
Primary range of drilling machines are VS32B and range 20 - it means V20B - bench design, VS20B - pillar design and VR4/20B - gang design - set of four drilling machines on one table. Both mark of these machines: they combine thein havy duty frame with operational reliability. They are designed for drilling, reaming and thread cutting in both single-part and series production. The frame is formed by a cast-iron baseplate with a firm steel pillar. The headstock and the bracket with a revolving angular table are vertically adjustable and revolving 360° on the pillar.
The drive of gearbox is realised by means of a V-belt which can be tightened. The machina is eqiupped with 15 speed steps. The speed changes are realised by two hand revers in combination with the V-belt. The four power feeds are shifted by a hand lever, switched on and off by the lever of the automatic coupling. The automatic feed disconnection is set in motion with blunting or breaking the tool. The feed may also be switched off manually any time. The drilling depth is set on a milimetr scale. The spindle seeated in ball bearings returns into the upper position by a spiral spring.
The headstock is lubricated by a circulation pump installed in the headstock. The angluar table enables camping of the workpiece in the vertical as well as horizontal plane. The electric equipment is concetrated in a box on the side of the machine. It protects the motor against short-circuit and the whole machine against the spontaneous start after a voltage loss. The electric equipment complies with the EU-regulations.
The cooling liquid is supplied to the workplace by the electric pump situated in the foot of the machine. The liquid circulates in a closed circuit and is controlled by a cock.
...
View Detail
Mounted Drill Machine
FOB Price :Get Latest Price
Primary range of drilling machines are VS32B and range 20 - it means V20B - bench design, VS20B - pillar design and VR4/20B - gang design - set of four drilling machines on one table. Both mark of these machines: they combine thein havy duty frame with operational reliability. They are designed for drilling, reaming and thread cutting in both single-part and series production. The frame is formed by a cast-iron baseplate with a firm steel pillar. The headstock and the bracket with a revolving angular table are vertically adjustable and revolving 360° on the pillar.
The drive of gearbox is realised by means of a V-belt which can be tightened. The machina is eqiupped with 15 speed steps. The speed changes are realised by two hand revers in combination with the V-belt. The four power feeds are shifted by a hand lever, switched on and off by the lever of the automatic coupling. The automatic feed disconnection is set in motion with blunting or breaking the tool. The feed may also be switched off manually any time. The drilling depth is set on a milimetr scale. The spindle seeated in ball bearings returns into the upper position by a spiral spring.
The headstock is lubricated by a circulation pump installed in the headstock. The angluar table enables camping of the workpiece in the vertical as well as horizontal plane. The electric equipment is concetrated in a box on the side of the machine. It protects the motor against short-circuit and the whole machine against the spontaneous start after a voltage loss. The electric equipment complies with the EU-regulations.
The cooling liquid is supplied to the workplace by the electric pump situated in the foot of the machine. The liquid circulates in a closed circuit and is controlled by a cock.
...
View Detail

RELATED PRODUCTS



 
More Products From This Supplier
 
 
Recommended Product
 
 

sending enquiry
Thank You Close X
You may also visit more related suppliers as given below :

unable to instantiate your call right now. please try after some time.

close

© Copyright HelloTrade.com