Power Control Centers H40 fully type tested to BSEN 60439-1:2004 Form-4 completely segragated design. Rated up to 6000Amps and 100KA Short Circuit Level. Withdrawable and Fixed Design for Main Incomers and Outgoing feeders. Provided with a wide range of Protective Devices and Relays.
Bus Bar system fully rated and Braced to withstand the short circuit currents and fully segragated from incoming and outgoing Circuit Breakers.
Power Control Centers are provide with the facility to be connected by cables or Bus Duct on top to the supply transformers.
Fully Automatic control by Programmable Logic Controllers is provided to allow Incoming Feeder Interlocks and synchronization. Remote control and Monitoring options can also be provided.
Standard Metering as well as Microprocessor Based Network Analysers can be provided on each Incomer and Outgoing Circuit Breaker. Communication option of the Power Network Parameters can be provided using RS485 Modbus. Power, Voltage, Current and Frequency Transducers may also be provided as optional with 4-20mA/0-10V output signal for remote access by the DCS system.