Lux Varnish is a one component polyurethane varnish, which provides high gloss, transparency and hardness. It is easily applied for internal wood purposes.
Basic Raw Material:
Special Alkyd Resin - Dryers - Special Solvents - Additives
4-4.5 min (Cup # 4 at 25ºC)
By Weight: 54% (Before Curing)
Suitable Substrates: Suitable for all types of wood surfaces.
1- Surface should be clean and free of dust, grease, and oil.
2- New wood surfaces must be sealed using "Vniwood" sealer or a suitable sealer. Complete by sanding using grit sandpaper number 320-360 to obtain a smooth surface.
3- Old varnish surfaces must be sanded using grit sandpaper number 320-360.
Mixing Ratio: N/A
Pot Life: N/A
Thinned by adding 10-15 % of kerosene, turpentine, or gasoline.
1- Apply using a brush, or a spray gun nozzle 1.5-1.8 mm.
2- Spraying Pressure: 3-4 bar.
3- Number of coats: 1-3 coats.