is a component of unsaturated polyester putty, where its' hardener is used for curing. It is suitable for all types of marbles adhesion.
Basic Raw Material:
Unsaturated Polyester Resin - Benzoyl Peroxide - Special Additives
Marble Adhesive Quick (Liquid and Gel)
Liquid: 1.05 ± 0.1 gm/cm³ Gel: 1.16 ± 0.1 gm/cm³
Liquid: 2000 – 5000 c.p./25ºC Gel: 100,000 – 110,000 c.p./25ºC
By Weight: 70 % (Before Curing)
Suitable Substrates: Suitable for all types of marbles.
Surface should be clean and free of dust, grease and oil.
Mix the desired amount of Marble Adhesive, by approximately 3% hardener using a plastic spreader or a putty knife.
Liquid: 2 – 5 minutes at 25ºC
Gel: 3 – 6 minutes at 25ºC
Using a flexible blade apply a coat across the desired area.