Pexin Stuck is a two component polyester filler paste, designed to repair damaged body panels on vehicles.
Basic Raw Material:
Unsaturated Polyester Resin - Di-Benzoyl Peroxide
Grey, red, white, and yellow
1.9 ± 0.1 gm/cm³
1000000 – 1400000 c.p./25ºC
By Weight : 89% ± 1 (Before Curing)
Suitable Substrates: Suitable for cars and buses.
1- Surface should be clean and free of dust, grease, and oil.
2- Surface should be sanded using grit sandpaper number 120.
Mixing Ratio: Mix the desired amount of putty by approximately 3% hardener using a plastic spreader or a putty knife.
Pot Life: 3 – 5 minutes at 25ºC.
Using a flexible blade, apply a coat across the desired area.