Vniwood Sealer is a high building material used to fill pores in wood or veneer substrates. It is mainly used for the preparation of the substrate before varnish application to obtain a fine smooth surface without any influence on natural wood grain.
Basic Raw Material:
Alkyd Resin - Nitrocellulose solution - Filler
110,000 – 140,000 c.p./25ºC
By Weight: 47% (Before Curing)
Suitable Substrates: Suitable for wood surfaces.
1- Surface should be clean and free of dust, grease, and oil.
2- Surface should be sanded using grit sandpaper number 120.
Mixing Ratio: N/A
Pot Life: N/A
Thinned till required viscosity.
1- Apply using a spray gun nozzle 1.5 mm.
2- Spraying Pressure: 4 bar.
3- Spraying Viscosity: 40 – 30 seconds Din cup # 4 at 77ºF (25ºC).
4- Number of coats: 1 - 2 coats.