IMCO. US

The IMCO Ton-Limit Detector and Hi-Low Limit Detector are sophisticated, state of the art, precision instruments built with a modular format featuring large, bright digital displays. They combine visual measurement of load at all times plus feature the unique Control Monitoring Knobs which lets the user pre-select, by a single dial, load trip points. An IMCO system for your press is determined by the type of press not the tonnage of the press.
Very simple in operation, the digital displays continually indicate load in direct tons always reading the actual tonnage at each working stroke. If any piezoelectric transducer signal exceeds the pre-set value it will activate the circuitry in milliseconds for press drive disengagement.
MCO'S innovative and unique Digital Systems can provide limits in both percent and direct tons. The Control Knobs are used to set the limits. By pressing a center button "Display Tons", it displays each tonnage increment on the Digital Displays allowing the limits to be set with more precision.
It is also possible to not only monitor for overload of the machines maximum capacity, but also the optimum tooling capacity which may be a great deal less than that of the machine.
Following the correction of an overload or under load of an IMCO system, a reset button is located behind the clear lexan box cover to cancel out the readings and reactivate the system.
Each system is supplied complete with piezoelectric transducers, mounting brackets, flexible two conductor shielded Belfoil cable for column mounting or flexible two conductor shielded Teflon cable for pitman mounting, which is impenetrable to oil and grease, shock mounts and an Installation Manual.