Suitable for all kinds of diesel fuel injection pump test benches / stands.
Electromagnetic sensor to pick up pulses - Comes complete with the Magnetic pickup cable containing the electromagnetic sensor at one end which is used to pick up pulses from the main shaft of the test bench.
Note: We can also supply a 50 teeth gear along with the tachometer at no extra cost which can be mounted on the main shaft of the test bench and the magnetic sensor can be placed at a distance of 1 mm from the gear to pickup pulses OR one can make 50 equidistant holes on the back of the flywheel with a depth of at least 8 mm each and then place the pin of the electromagnetic pickup at a distance of 1mm from the surface of the outer diameter of the 50 teeth gear or the face of the flywheel, whichever is applicable.
RPM Range: 0 - 9999
Timer: Displays time in fractions of second
Stroke Counter: 100 - 1200 strokes - can be preset in multiples of 100
Pressing the Start button on the tachometer operates the solenoid which is fixed to the test tube console on the test bench (When one has to take delivery of pump). Pressing the button energizes the solenoid and then automatically DE energizes it after completion of pre selected strokes. Hence enabling the user to note the output delivery of pump on a test bench.
Works on both 110 +/- 10% V, 60 Hz (USA) or 230 +/- 10 % V, 50 Hz (UK) AC supply. Can be customized according to your requirement - Please leave a message after your purchase as to what you prefer.
Note: 230 / 220 V mains supply tachometers are ready stock and would be shipped out within 2 business days, whereas 110 /120 V mains supply tachometers would be customized hence would be shipped out in 4-5 business days of receiving cleared payment.