As an affluent name of this domain, we hold expertise in manufacturing and supplying a high quality Green Chemical Distillation to our esteemed clients. The distillation of organic substances can have the volume weigh up to 800L. The solvent, chemicals and other substances are distilled along wity matured mass accuracy. Furthermore, clients can provide their specification requirements for designing the machine according to the business requirements. We customize the unit as per the needs and demands. 0.11 to 0.95mm, the solvent are distilled and recovered.
- Accuracy and measurement
- Organic or inorganic distillation
- Quick processing
- Recovery volume : 60 / 80 liters
- Power consume: 220V 4.65KW
- Diathermic oil : 23 KG
- Machine dimension: Main body: 1100x 780x1200 mm
- Recovery rate: 85%
- Recovery time : 3 ~ 4 hours
- Install the unit in a wide and ventilated place.
- Disconnect electric power before doing any action.
- No taking off the control panel
- Change the diathermic oil every 1000 working hours.
- No filling the solvent container up over the level (80 liters)
- Remove the waste after every recovery process
- After opening the crate, plug in 220 V power, and connect the ground (earth).
- Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
- Close the lid and tighten it.
- Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
- Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
- Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
- If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer(14) then turn on the switch(13).