Six Colour Flexo Printing Press
Vector Controlled Three Drive System
Web Guiding System
Automatic Tension Control
Motorized Ink Pump
Ceramic Anilox Roll
Chambered Doctor Blade System
Model: @ flexo 601000
1000/ mm 6 - colors Flexographic High Speed Printing Machine
Standard scope of supply
The machine consisting of:
_ Two Roll reel stand of center winding type
_ Maximum reel outer diameter is 1000 mm, and maximum rell weight 500 kgs.
_ Unwind shaft is mounted of on safety chucks with reel cones for 76 core i.d.
_ Manual centering Devise – 1nos.
_ Unwind tension controlled by 1no. manual spring loaded friction type woolen felt padded
_ Shaft for 76 mm core i.d. is provide
_ Auto stop mechanism to stop the machine for the break in web.
_ Side frame Construction is of Ribbed anti vibration cast iron body (75mm) wide precisely
_ Cerami Anilox Roll 700 # LPI duly balanced and hard chrome plated.
_ 1 no. Impression Roller duly balanced, Grinded and hard chrome plated
_ Minimum maximum cylinder repeat sie 230 mm to 500 mm
_ All the above Roller are inter connected with each other and are Gear driven
_ Pressure for inking Rollers to Anilox Roller and Anilox Rollers to Plate Cylinder is provided
through screw type shaft with sliding arrangements on the square and ‘L’ Blocks Two nos.
Lock nuts is provided to lock the printing deck while in operation
_ 5 hp Digital AC drive with common AC motor is provided for all the printing stations
INFEED & OUTFEED UNIT
_ Common In feed and out feed helps to maintain tension continuously betwn printing zones
& also maintains good registration
_ Designed for electric heating comprising of 5hp. AC Blower inter connected with 12 kw
Heaters of 1kw each.
_ Hot Air spread to the drying head box fitted immediately after each printing station through
_ Drying head is provided in each Printing station with overhead drying chambers after last
Note : Can Also be designed fot Thermic Fluid, Diesel Hot Air System etc. and be fitted
accordingly on request on request at extra cost. (Please Specify)
_ Manual side lay (lateral) register by means of a mounting blocks on the operator side.
_ Vertical Registration adjustment is done by screw type shaft on operator side.