Welcome to HelloTrade!
I Want to Buy
Request for Quote

Recycling Machine 30,60,80.100.200

Next Product »
Yes! I am interested
FOB Price : Get Price

With the assistance of our deft team of professionals, we are able to present a broad array of Recycling Machine 30,60,80.100.200. This machine assists in distillation the chemical components and substances from the plate, rod and other equipment. The offered machine can clean entire types of solvent from the chemically dip plates. Moreover, the control panel and one production line assist in incrementing the product supply in a unit. Apart from it, clients can get the unit from us at industry leading rates.

  • High power consumption
  • Easy stages for quick production
  • Less noise

Special Features:Solvent recovery unit for photopolymer flexo plates

A. General description:

This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

B. Technical information:

Recovery Volume: 80 Liter

Power Consume: 220v AC, 5.65Kw

Dia Thermic Oil: 33 kg.

Machine Dimention Machine Boady: 1300mm x 880mm x 1300mm

Recovery Rate: 85%

C. Operating steps:

1. After opening the crate, plug in 220 V power, and connect the ground (earth).

2. Open the lid and fill the tank up to the level with solvent to be recovered (80 L)

3. Close the lid and tighten it.

4. Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).

5. Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.

6. Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).

7. If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).

D. Important:

1. Install the unit in a wide and ventilated place.

2. Disconnect electric power before doing any action.

3. No taking off the control panel

4. Change the diathermic oil every 1000 working hours.

5. No filling the solvent container up over the level (80 liters)

6. Remove the waste after every recovery process
. : 30 ltr


B. Technical information:

Recovery volume : 60 / 80 liters
Power consume: 220V 4.65KW
Diathermic oil : 23 KG
Machine dimen


Invalid Input
Please enter Mobile Number
Invalid Email ID
Invalid Email ID
Your Contact Information
Competitive Quotes
Choice of Suppliers
Payment Protection
sending enquiry ....

unable to instantiate your call right now. please try after some time.


©Copyright HelloTrade.com