Instrumex Respirable Dust Sampler is based on the simple design standardized by USEPA for monitoring the Total Suspended Particles (TSP) in Ambient air and also simultaneous sampling of pollutant gases like SO2, NOx, CL2 H2S, CS2, etc. These gases are analyzed subsequently by simple chemistry method to determine concentration of specific pollutant.
- Particle Collection: Below 10 microns collected on filter paper and bigger than 10 micron will be collected in a separate sampling bottle, through a cyclone separator.
- Bower Motor: The instrument has a Brushless and Noiseless motor which has replaced the conventional high speed blower which was belt driven and where carbon brushes were required to be replaced at regular intervals. Therefore there is no need to keep track of the belt & the carbon brushes.
- Programmable Timer & Relay : To set the ON Time. Programmable Relay for superior motor protection in case of Hi and Low voltage.