Intellitec Mv Ltd.

Developed for the Royal Mail the Intellitec Cargo Light Control is the ideal solution for vehicles fitted with body / cargo lights. With health and safety concerns at an all time high, a good level of light whilst loading / unloading a trailer is a pre-requisite. The problem is the high amounts of current being drawn from the starter battery by these lights. Cargo Light Control allows multipoint switching in the vehicle body. Low voltage sensing and a visual warning of lights being automatically switched off are just two of the benefits the system brings. Prevents body lights from being accidentally left on Allows 20 minutes of body light use at good battery voltage Blinks lights eight times to warn of impending "lights off" Voltage sensitive timer allows only two minutes of light at low battery voltage Easy to install OEM Multipoint switching Fully waterproof IP67 Approved by the Royal Mail Intellitec’s Cargo Light Control (CLC) has been designed to control the cargo/body lights on any type of commercial vehicle or trailer, with the health and safety of the operators in mind. The CLC is easy to install and provides multipoint switching, it uses momentary switches in parallel to turn the lights on and off. In addition to this function, the CLC offers low voltage battery protection from the lights being accidentally left on. When the lights are left on for more than twenty minutes, the CLC will blink the lights at a rate of eight times per minute, to alert the driver/operator of impending lights off. After the eighth blink, the lights will be switched off to prevent further current draw from the battery. If the driver/operator wishes to keep the lights on, they simply hit the switch and another twenty minutes of light is allowed. The CLC also provides low battery voltage indication for a period of two minutes while the lights are on (should the battery voltage drop below 24.0 volts). The lights will be blinked eight times per minute and then shut off to protect starting power. The CLC is a fully waterproof module and is suitable for most environments. The electrical connections are made with Delphi Packard connectors.