We are well known manufacturer and supplier of Dry Block Temperature Calibrator.
The Test instrument consist of two single enclosures. Front size 150 X 150 mm & 280 mm depth. They are connected with each other & equipped with a portable handle. The left enclosure contains a block with bore diameter of 18.5 mm & 110 mm depth which can reached from the top, face the reception of the test piece. In this block the heating cartridge & temperature sensor for the determination of the block temperature are installed / accesses from the bottom.
The right enclosure contains:
1) PID controller for control of the block temperature in which we can see the set value & present temperature of the block.
2) Power switches & power on indicator
3) Fan ON / OFF switch for cooling the block.
It has to be made sure that the heat transmission resistance between the heating block & the test piece (thermometer, temperature sensor, temperature switch) is as low as possible. Therefore it is necessary to use exactly adapted pockets.
Regulation of the heating block
-30 to 125 deg C
230 V AC, 50 Hz.
/- 0.5 Deg C
Block Bore ID
4 numbers of Adapter pocket are provided extra with the following sizes
Size of the instrument
150 X 300 X 280 mm
Weight of the instrument