Wooden bird-feeder white with copper roof, 23 inches high, 10 inches round, base 13-1/2 inches. made of imported exterior laminated 9 ply- plywood, laminate ply layer sections are glued with water proof glue and sealed with polyacrylic,then sanded and then repeated three times, then cut to size for our woodcrafts. Our birdhouses and woodcrafts after finished are made to last for years in all four seasons. Even as well as we try to make our products, there are some preventive maintenance measures you can take, like cleaning, touch-up painting, and sealing. You will get these instruction in your order. Mount this feeder on a 4x4 inch post. Note: This means that you must have post that measures four inches by four inches, not the wooden post that measures three and one half inches by three and one half inches. You can purchase this post at your local Home-center. This Bird-feeder can be cleaned with a solution of bleach, dish soap and water in a spray bottle, spray inside feeder with solution, let set for about five to ten minutes and rinse gently with water hose.feeder also has drain hole in center of wooden base under clear poly glass or glass.