We are offering Heavy Duty Planner Machines. The characteristics of Heavy Duty Planner Machines are as follows:
Lubrication: Automatic lubricating system with suitable forced pump has been provided to facilitate the lubrication of bearing surface. Wiper fitting & oil filter trays have been fitted to keep the 'V' guides clean of oil, to avoid oil wastage & filtering of oil. Provision has been made for oiling the gears from outside. The Bed: The bed is made out of high duty alloys grey casting having proper strength & long wearing qualities. It is deep box section & tied together at frequent intervals by double walled bridge pieces extended to the bottom of bed. The two 'V' guides are accurately hand scrapped upto extreme limits.
The Table: It is of box section with hand scrapped 'V' ways to bear heavy load. It is heavily ribbed & the Rack provided in it is spur milling cut & non wearing quality for smooth running. Adequate number of 'T' slots are provided to clamp the work-piece precisely & securely.
The Gearing: The main bearings for gearings are cast solid with the bed & Gear Teeth are Hob Cut. Helical gears are of finest quality material & are strong enough to stand increased cutting & quick return speed Gun metal bearings have been provided for all the shafts & Ball bearings for loose pulleys.
The Cross Rail: It is of box section heavily ribbed with large surface & is suitable for both hand & automatic horizontal & vertical feeds.
The Tool Posts: These all made out of close grain castings & steel to stand heavy cut. Special type of Dog Clutch fittings are provided for vertical lifting of the tool post. It can be driven both manually and mechanically.
The Columns: The uprights are of rigid box section firmly, bolted on the bed for precise alignment are capable of absorbing the heaviest shocks without vibration. Location pins are provided to help refit machine accurately after once it is dismantled. Designed for permanent fitting of the side tool posts.