Onmix Tile Grout
Ready to use cementitious waterproof coloured tile joint filler
It is a gap filling material between different wall and floor tiles like ceramic, glazed, vitrified, mosaic, glass mosaic and marble tiles etc.
Onmix Tile grout is a gap filling material between different wall and floor tiles like ceramic, glazed, vitrified, mosaic, glass mosaic and marble tiles etc.
Characteristics / Advantages:
Cementitious, only water to be added Available in standard Onmix shades Resistant to dust penetration. Excellent bond with tiles. Easy to Clean.
Form Appearance / Colours Ivory, white, black, grey, sky blue, cream.
Packaging: 1kg Bag
Storage Conditions / Shelf-Life:
6 months from date of production if stored properly in undamaged original sealed packaging in dry and cool conditions.
Chemical Base: Cement, selected fillers and additives
All dust, loose and friable particles must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum. The adhesive or mortar used for bedding the tiles must be completely cured before application of Onmix Tile grout.
Mixing 350-380 gm per water per 1kg pack of Onmix tile grout.
Application Method / Tools:
Tile grout. is applied by trowel, spatula into the joint. Then “smooth” evenly to level and finish. After that remove residual material with a spatula and clean the surface with a sponge and water. Do not press on or into the joints..
Notes on Application / Limitations:
Apply only to sound, prepared substrates. Always use in a small area at a time so that excess grout can be cleaned from the tile surface as soon as possible by using water with a dry sponge or cloth During cleaning move the sponge crosswise to the joints and not along the joints Protect freshly applied material from water.