We at Klassic Klarol Filters Private Limited manufactures Oil Filtration Systems with high Standard. We are competent to design and the filteration system designed according to the latest of fabrication technologies and are available to our clients across the country at highly competitive price structures.
Working Principle of Industrial Oil Filtration Systems:
The oil is first cleaned by the surface filters i.e. up to 149 microns by the washable suction filter and up to 10 microns by a filter installed after the pump. It is then cleaned by the KLAROL fiber glass or cellulose depth filters. It enters (zoom the cross section) the depth filter from the bottom. Here the compressed fiber glass medium removes high amount of solid contamination down to less than a micron. Sludge, varnish and lacquer are also removed by this filter. If the oil is contaminated with water, fiber glass filters are replaced with cellulose filters which are used to absorb the same. Clean oil exits from the oil outlet. Continuous cycling can remove contamination down to NAS 4. Filter change is done by removing the top cover and is easily done.