Locating Pins are consumables used in manufacturing-fixtures and Inspection-Fixtures. Concentricity of work-piece-locating diameter and fixture-locating diameter is maintained within 10 microns. Locating pins with a bigger collar diameter with a closely controlled thickness (used for job resting) are also available. Housings are useful holding devices of work-piece in the machine work-head where faster holding of work-piece by clamping is required to reduce cycle time. Housings are made form finest grade of Case Hardenable Alloy Steel so that maximum surface hardness is achieved and a tougher core to withstand heavy machining stress. In Normal Housings Outside Diameter/Inside Diameter of the work-piece is located with a locating Bore/OD in the Housing made with minimum possible clearance(H7-h6 fitting). The Other side of the Housing is fitted in the Machine Work-head housing. The concentricity of machine locating diameter and work-piece locating diameter is maintained within 5 to 10 microns. In Special Housings, PCD Holes/Splines are used for Job Location.
|Locating Pin for Manufacturing Fixtures||Locating Pin for Inspection Fixtures|
|Housing for Machine Work Head||Housing for Straightening Machine|
|Housing for Piston||Broaching Locator|
|Vee-Shaped Locator||Housing for Spindle|
|Housing for Balancing Machine|