Wet Blasting Cabinets Works on the Wet Slurry Induction principle of abrasive blasting. Water and abrasive Slurry is sprayed through the Blast Gun on the job for blast cleaning. The process is also Called ‘Wet Blasting’ or Liquid Honing. The equipment uses fine to super fine abrasive. It is used to remove thin deposits, scales, fine burrs from multi-tooth cutting tools, and for super finishing of machined surfaces without damaging the sharp edges and tolerances. The cabinet inside walls are zinc metallized to prevent the equipment against corrosion. Three standard models are available namely, KUW – 60/60, KUW – 91/82, and KUW – 120/90 of Wet Blasting Cabinets. Custom built cabinet size with a provision of atomization are also available in order to suit individual customer requirements.
Three standard models are available namely, KUS - 60/60, KUS - 91/82, and KUS - 120/90.
|Description||KUS 60/60||KUS 91/82||KUS 120/90|
|Working Chamber mm|
|Dust Collector / Reclaimer Fan Mator HP||0.5||1||15|
|Fan Capacity CFM||200||200||600|
|Slurry Pump Motor (HP)||....||1||1|
|Air Injector (mm)||2,3||2,3||3,4,5.5|
|Blast Nozzle mm||6,8||6, 8||8,10,12|
|Compressed Air Reqr (CFM)||21||25||25|
|Abrasive Storage Capacity Litres (CFT)||28(1.0)||28(1.0)||42(1.5)|