Item code: MTS-916
FLUIDISATION AND FLUID BED HEAT TRANSFER UNIT
This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream.
- To study the fluidized bed drying. To plot the drying curve under fluidized bed condition.
- Electricity Supply 1 Phase, 220 V AC, 3 kW.Granular and free flowing solid of size 1 to 2 mm.
Column : Material Borosilicate Glass Dia. 80 mm. Total Length 500mm.Cyclone Separator : Material Stainless Steel, Compatible Capacity with collector. Air Circulation : By forced draft fan, Arrangement is done vary the air flow rate. Heating Chamber : Compatible capacity Heater : Nichrome wire heater Temperature Sensors : RTD PT-100 type.Control panel comprises of :Digital Temp. Controller : 0 199.9°C (For Hot Air) Standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided alongwith the Apparatus The whole set-up is well designed and arranged in a good quality painted structure.