national special effect is a water based decorative finish, used for creating a variety of patterns and designs on surfaces to match the interiors.
national special effect is ideally recommended for interior application and can be used on gypsum boards, concrete, plastered and wooden surfaces.
all colors are available as per national color card.
national special effect is supplied in ready to use form. If thinning is required 5% water can be added.
Theoretical Spreading Rate:
8-11 sqm / litre depending on the application method, film thickness and nature of surface.
Surface preparation and application method:
The surface on which national special effect is to be applied should be dry and free from dust and oil. Using sand paper, the surface should be leveled and made free from loose particles.
1. Apply one coat of national acrylic primer (w. B. ) as penetrating sealer to seal the surface.
2. If required, two coats of national stucco filler can be used for leveling the surface.
3. Apply one coat of national eggshell emulsion semigloss as background color.
4. Once dry, apply national special effect using desired application techniques like ragging, nylon, stippling, color washing, marbling or sponging.