NBH manufactures high quality Power Distribution Panel Boards upto 6000 Amps Main Bus. The NBH Distribution Panels offered also conform to IP 54 degree of protection. All Panels are properly pre treated in 7 tank hot phosphating tanks & then powder coated to withstand 1000 hours of salt spray test. Some of the Salient features of our PCC's are:
Totally enclosed, self-supporting, floor mounted, dust and vermin proof enclosure fabricated out of 14G/16G CRCA steel sheet enclosure with cross linked foam gaskets on doors.
- NBH LT Panels / PCC Panels are Fully Compartmentalised in design
- Provisions for future extensions
- Permanent identification labels shall be provided in PCC Panels / LT Panels and in MCC Panels as per site application demand for each compartment
- Electrolytic Grade tested Bus Bars - Copper or Aluminium as desired
- Proper Earthing provided at the bottom of the panels throughout the entire length
- Removable Gland plates
- Permanent computerized identification labels / Ferrules provided
- Degree of Protection IP 54
- Short circuit breaking Capacity of 50KA for 1 second.
- PCC Panels, LT Panels multiple incomers, DG Incomers, bus couplers with proper interlocking
- Required protection, fault indications, interlocking is provided
- NBH offers Intelligent and flexible user friendly designs in PCC Panels like Top, Middle, Bottom Horizontal bus bar chamber, NBH PCC panel are designed as per customer requirement with Aluminium/copper bus bars. Cable entry design in LT Panels as per client specification or site demand
- NBH PCC Panels have facilities like DG Incomer with AMF Functions, Required feeders shall be operated on DG Incomers as per interlocking with cut off features
- NBH LT Panels have provision to connect bus duct at main incomer side