NBH manufactures high quality Electrical Panels upto 6000 Amps Main Bus. The Panels offered also conform to IP 54 degree of protection. All Panels are properly pre treated & then powder coated to withstand 1000 hours of salt spray test. Some of the Salient features of our Electrical Panels.
Totally enclosed, self-supporting, floor mounted, dust and vermin proof enclosure fabricated out of 14G/16G CRCA steel sheet enclosure with cross linked foam gaskets on doors.
- NBH Electrical Panels, LT Panels / PCC Panels are Fully Compartmentalised in design
- Provisions for future extensions
- Permanent identification labels shall be provided in PCC Panels / LT Panels and in MCC Panels as per site application demand for each compartment
- Electrolytic Grade tested Bus Bars - Copper or Aluminium as desired
- Proper Earthing provided at the bottom of the panels throughout the entire length
- Electrical Panels have Removable Gland plates
- Permanent computerized identification labels / Ferrules provided
- Degree of Protection IP 54
- Short circuit breaking Capacity of 50KA for 1 second.
- PCC Panels, LT Panels multiple incomers, DG Incomers, bus couplers with proper interlocking
- Required protection, fault indications, interlocking is provided
- NBH offers Intelligent and flexible user friendly designs in Electrical Panels like Top, Middle, Bottom Horizontal bus bar chamber, NBH PCC panel are designed as per customer requirement with Aluminium/copper bus bars. Cable entry design in LT Panels as per client specification or site demand
- NBH Electrical Panels have facilities like DG Incomer with AMF Functions, Required feeders shall be operated on DG Incomers as per interlocking with cut off features
- NBH Electrical Panels have provision to connect bus duct at main incomer side