fitted internally or externally in new buildings or as replacement chutes in existing buildings. For use in flats, apartment buildings, factories, offices, shopping centres, hotels and hospitals.
hardall refuse chutes conform to british standards bs1703 and bs5906 and are manufactured to the highest quality, normally from 1. 5mm stainless steel (other material and thicknesses are available). Hardall spc hopper doors, have a certified 1. 5 hour fire rating and smoke seal in accordance with bs476 and bs5588.
advantages of steel compared to concrete
chute sections are relatively light weight and can be man handled into position. Typically a 10 storey chute can be installed in 3 to 4 days as soon as the building structure is complete and the roof is in place.
supplied in circular section with internal diameters ranging from 450 to 800mm. Where possible hardall always recommend the optimum chute size of 600mm diameter. The hopper doors supplied with this chute size suit most current user requirements in terms of capacity. In addition however hardall offer a complete bespoke design service to provide chutes 'fit for purpose' in many shapes and sizes.
each chute is specifically designed using the latest cad technology to meet customer requirements and to suit the building layout. Generally a typical chute will comprise of two or three sections per floor connected by angle rings or a telescopic joint. An entry section holds the spc hopper door and the chute is supported at each floor level using a special clamp band support frame.
the inclusion of automatic or manual chute cleaning systems, disinfectant & sanitising units, electrical interlocks, foul air exhaust fans, sound deadening and fire control equipment within the overall design can aid in meeting the needs of most client specifications.
health & safety
hardall chutes are designed to be safe to operate. Hopper doors are finished with rounded edges and counter-weighted for easy opening. Cut-off plates at the base of the chute are installed, where possible at a safe working height and orientated to minimise any head hazard. An automatic 1 or 2hr fire door located underside of the first floor of the chute is where possible always installed above head height but easily accessible for re-arming. Any electrical equipment complies with the latest iee standards and is installed and tested by qualified engineers.
hardall provide comprehensive and job specific method statement & risk assessment documentation at the start of each project and operator manuals at time of hand-over to comply with latest cdm regulations.