1 shot 4007 hardener not only accelerates the drying times of 1 shot lettering and pearlescent enamels and chromatic bulletins; but enhances adhesion qualities as well. The use of 4007 hardener also aids in preventing lifting when automotive clears are used over 1 shot lettering enamels. While greatly reducing the workable pot life of your 1 shot enamels, adding up to 20% 4007 hardener in place of any other reducers, will allow for clear coating withen 12-24 hours. Note: as with all custom paint procedures, test panels should be utilized, and the first two coats of clear should be applied very dry.
Kapci MS Hardeners are polyisocyanate hardeners for Kapci two component products. These hardeners are especially designed for Kapci 2K paints, MS ...view details
Low-Tox Hardener is an alternative hardener for those already sensitized to poly-amine type hardener. In its un-accelerated state Low-Tox is ...view details
Pro-Die Hardener (0) for hardening, sealing and protecting dies. It does not build up and is completely absorbed by the plaster. Attention: Do not ...view details
sending enquiry ....