Welcome to HelloTrade!
I Want to Buy
Request for Quote
Member
Since
1Yr
Opposite Rajkot Milk Dairy, Dudhsagar Road
Rajkot, Gujarat-360003, India+(91)-281-2387817
Contact Supplier

Mould Release Oil

Next Product »
Yes! I am interested
FOB Price : Get Price

Mould Release Oil –CW (Water Based) – PasandTM MRO-CW

PasandTM MRO-CW is premium quality water soluble oil that gives milky white emulsion when diluted in water. It acts as a release agent when applied to framework prior to placing concrete against the form. This facilitates stripping and at the same time minimises blemishes to the concrete surface.

Coverage: 100 to 160 m2 in diluted material depending on the porosity and texture of the mould surface.

Features and Benefits

· It gives excellent emulsion with water.

· It has Rust inhibitor properties for better mould life.

· It only requires water for dilution.

· It has low titre so it does not freeze at room temperature.

Application

Add 1 litre of PasandTM MRO-CW in 5 litre of water. Direct to use with no additional hydrocarbon like petrol, diesel or kerosene needed.

It is usually used in Cement-Concrete casting, MS mould, Hume Pipe Mould, Railway sleeper mould and other similar applications.

Specifications

Appearance

Clear brown liquid

Specific gravity

0.91 – 0.94

Viscosity (B4 Cup)

20 - 30 sec

Flash Point

160 – 200° C

TFM

98% minimum

pH

Neutral

Packing

PasandTM MRO-CW is packaged in 50 Litre or 200 litre HDPE drums. Private labelling and customised packing is also available on request. Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames.

Safety & Handling

Material must be handled as an Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.

Mould Release Oil

Mould Release Oil

Get Quotes
Yes! I am interested
FOB Price : Get Price

Mould Release Oil –WW (Water Based) – PasandTM MRO-WW

PasandTM MRO-WW is highly effective water soluble oil that gives thick brown emulsion when diluted in water. It is formulated with a blend of mineral oil plus surface active release agent and is designed with high viscosity so it will not run off or get absorbed in the formwork. It can be applied by brush or cloth.

Coverage: 80 to 180 m2 in diluted material depending on the porosity and texture of the mould surface.

Features and Benefits

· It ensures excellent surface finish.

· It Minimizes blow hole and staining.

· It does not require cleaning of oil stains.

· It has high lubricating power.

Application

Add 1 litre of PasandTM MRO-WW in 5 litre of water. Direct to use with no additional hydrocarbon like petrol, diesel or kerosene needed.

It is usually used in Plywood, MS mould and other similar application.

Specifications

Appearance

: Dark Colour Liquid

Specific gravity

: 0.98 - 1.00

Viscosity (B4 Cup)

: 40 – 45 Sec.

Solubility

: Soluble In Water

pH Value

: 8 - 9

Packing

PasandTM MRO-WW is packaged in 50 litre or 200 litre HDPE drums. Private labelling and customised packing is also available on request. Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames.

Safety & Handling

Material must be handled as an Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.

Mould Release Oil

Mould Release Oil

Get Quotes
Yes! I am interested
FOB Price : Get Price

Mould Release Oil – WO (Oil Based) – PasandTM MRO-WO

PasandTM MRO-WO is an oil based, water insoluble mould release oil. The chemicals react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould, thereby enabling easy striping from concrete and acting as a protection to steel and wooden formwork.

Coverage: 30 to 40 m2 in diluted material depending on the porosity and texture of the mould surface

Features and Benefits

· It reduces damage to formwork resulting in extended usable life.

· It ensures easy release and good fair-faced concrete.

· I cleaning of oil stains if plastering is not required.

Application

It is primarily used for Fiber, Rubber and PVC moulds. It is also used for horizontal surfaces. It can be applied by brush, sponge or conventional mould oil-sprayer. It is direct to use or can be diluted 1:1 with MTO or Kerosene.

Apply one coat thinly and evenly over the entire surface. Only the thinnest coating necessary to achieve effective coverage is required.

Specifications

Appearance

: Amber Liquid

Specific gravity

: 0.88 – 0.91

Solubility

: Soluble in Diesel/Kerosene

Viscosity (B4 Cup)

: 24 – 27 Sec

Flash Point

: More than 150°C

Packing

PasandTM MRO-WO is packaged in 50 litre or 200 litre HDPE drums. Private labelling and customised packing is also available on request. Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames.

Safety & Handling

Material must be handled as an Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.


RELATED PRODUCTS
 

Convenient
Competitive Quotes
Choice of Suppliers
 
sending enquiry ....

unable to instantiate your call right now. please try after some time.

close

©Copyright HelloTrade.com