Pertici S.P.A

ASSEMBLY BENCH MAIN CHARACTERISTICS The BL300 assembly bench has been developed to simplify and facilitate the assembly of frames. Its work surface, with variable length and width, consists of six aluminium bars with rubber cladding on the contact side. BASIC COMPONENTS N°4 coils (length 7 metres) complete with fittings. N°6 containers. N°4 air sockets.

Automatic screwdriver main characteristics fixing of reinforcements inside pvc profiles. Motor/screwer cylinder stroke 75mm. Screwer head stroke 125mm. Pneumatic horizontal profile locking device. Automatic screw feed. Adjustment of screw insertion depth. Integral protection for the working area. basic components threaded insert for the insertion of cross headed screws (philips2). Pneumatic vice to hold the profiles. Steel stand with side rollers for profile holding. Countersunk head cross slotted screws 3,9x16 (standard).

Drilling machine main characteristics drilling machine with two heads for multiple drilling on aluminium profiles for 90° coupling of the band and of the kick plate. Variable interaxis between points min. 28 - max 180. basic components n°2 points with double diameter (6/12) shaft diameter (10). N°1 stop rod with 2 blocks.

Industrial exhauster main characteristics the dm35 turbo exhauster is especially suitable for workshops producing aluminium or pvc door and window frames or other sectors which require this type of waste removal system. The exhauster is fitted with an electronically balanced turbine, housed in a aluminium enclosure and fixed directly onto the engine shaft. This unit requires no maintenance and ensures the upkeep of technical features and silent operation over time. Furthermore the exhauster has a rapid release trolley-type container for the replacement of full sacks, and a large surface area filter with optimal sealing efficiency protected by a cyclonic separator with external manual emptying device. The exhauster is supplied complete with a thermal magnetic circuit breaker.

ROTATIONAL SHAPER UNIT MAIN CHARACTERISTICS The FL 812 rotational shaper can be used for shaping glass beads and all types of aluminium profiles. The machine has an adjustable-angle type vernier, with which all the required angles can be obtained, and these features make a quick and precise assembly operation possible. BASIC COMPONENTS Steel stand. Graduated scale. Cutter disk with three cutting sides.

Universal corner crimping machine main characteristics the univer hp601 corner crimping machine is particularly suited for fitting aluminium profiles on to squares of the same material by means of cold plastic deformation. The machine's compact structure and the choice of materials used, guarantee a great working strength and the high quality of the work. The working cycle, which uses a hydraulic press for the deformation phase, is controlled by means of a plc. The simple setting system for the pusher wedge and knives makes the machine easy to use and ensures the repeatability of results over time. basic components n°2 knives 3mm. N°2 knives 5mm. N°2 knives 7mm. N°1 wedge for pusher 20mm. N°1 wedge for pusher 30mm. Support arms kit.