Technical Data POLYTONE AP 110
|TECHNICAL DATA||POLYTONE AP 110|
|Chemical Classification||PTBP Formaldehyde Resin (Resole)|
|Type||Heat Reactive/Adhesive Resin|
|Physical Form||Broken Lumps|
|Softening Point (B & R)||110° C – 120 ° C|
|Viscosity of 60% solution in Toluene at 25º C by B 4 Ford Cup||35 - 75 sec|
|Methylol Content||10-14 %|
|Moisture Content||0.5% Max|
POLYTONE AP 110 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.
Use of POLYTONE AP 110 imparts good open time combined with excellent green tack and cohesive strength in rubber based adhesives. Use of AP 110 is also useful for increasing the storage stability and heat resistance of the adhesive.
POLYTONE AP 110 is soluble in aromatic hydrocarbon solvents, chlorinated hydrocarbons, ketones and esters etc.
Available in 25.00 Kg net HDPE lined Kraft Paper bags with inner paper liner-on pallets.
Store under cool dry conditions. It is recommended that the material be used within 12 months from the date of manufacture.
The information contained herein is to the best of our knowledge, accurate and reliable. However , as use conditions are not within our control no guarantees are given or are to be inferred, nor is freedom from any patent to be inferred.