Technical Data POLYTONEM 130
|TECHNICAL DATA||POLYTONE M 130|
|Chemical Classification||Rosin Modified Maleic Resin|
|Physical Form||Broken Lumps|
|Softening Point (Ring & Ball)||115° C – 125 ° C|
|Viscosity of 60% solution in Xylene at 30°C by B4 Ford Cup||35-45 Sec|
|Acid Value||25mg KOH/gm resin(Max)|
POLYTONE M-130 is used for improving the film hardness of nitrocellulose and chlorinated rubber paints. Also used in sanding sealer and hammerton paints
POLYTONE M-130 is soluble Mineral Turpentine Oil, Toluene , Xylene and esters
Available in 25 Kg bags.
Store under cool dry conditions. It is recommended that the material be used within 12 months from the date of manufacture.
The information contained herein is to the best of our knowledge, accurate and reliable. However, as use conditions are not within our control no guarantees are given or are to be inferred, nor is freedom from any patent to be inferred.