Barkers have specifically designed this new generation of gates to compliment this growing market.
Gate sizes range from 3 - 10 metre openings in one leaf either motorised or manual.
Single leaf widths
3m - 10m in one single leaf design.
1.2m - 2.4 metres
Protector Cantilever Gates provide a solid and durable access point to a wide range of applications
from industrial sites, schools, commercial and business parks.
Barkers Cantilever Gates comprises three modules: the gate leaf, rear rolling (I) section
and the main tower, providing a robust and durable construction.
Each gate is manufactured form mild steel, galavanished to BSENISO 1461 and Polyester coating to
BSEN 9002 (2000) quality assurance benchmark. All free moving rollers are supplied in stainless steel, providing a low maintenance and trouble free product.
Each motorised gate is supplied with a 3 phase motor gearbox drive unit - 75kw and supplied 1P56 rated, the unit is designed for high usage and continuous operation.
Each gate can be fitted with varying integrated controls to allow for customer special requirements.
Safety Features (Automated Gates Only)
Automated gates are manufactured with integrated safety features, including photocells, two safety edge strips on the guide tower and one on the gate leading edge.
These features are of integral importance for the safety of pedestrians and vehicle access.
The gate will operate in safety mode when any obstruction or fault is detected, this results in shut down of the gate.