The Q-SET LED drivers offer constant voltage output in either 12VDC or 24VDC in either electronic or magnetic versions.
Q-SET-eLED - The IP 66 drivers are totally encapsulated in epoxy inside the cassette to limit water exposure and offer better thermal protection. Wattages are available in 60 or 120 for 12VDC and 100 or 200 for 24VDC. A 0-10V Dimming Option is also available. Two cassettes can fit into one Q Vault-5 for a max of 400 watts at 24V.
Q-SET-mLED- Inside our Q-SET enclosure we convert 120VAC to either 12VDC or 24VDC, available from 60 watts – 180 watts in our 12VDC option OR 100 watts -300 watts in the 24VDC option.
Important note – When determining what power supply to use with your LED’s, it is imperative that you look at the fixture manufactures’ specification sheet. A lot of landscape lighting fixtures have onboard drivers meaning that the fixture is fed with 12 VAC and only needs a transformer. If the fixture requires a remote LED power supply, you need to then determine if the fixture is designed as a constant current or constant voltage LED product in order to determine the power supply. Q-Tran can help assist you with these requirements.