While other transformers in the industry are only UL listed for mounting in the vertical position, the flexible and innovative Q6 Multi-Volt Toroidal Transformers are UL Listed for surface mounts in any position, including ceiling, floor, and six different wall surface mount positions (in any direction), and wherever it is needed to power a low -voltage system. In addition, the series offers three different mounting options, including a rod suspension* (above hung ceilings in commercial applications), a junction box mounting plate (for easy installation/wiring above a J-Box), and a decorative shroud (for a clean look and frontal ventilated design).
The Q6 features a unique dual-tap design that compensates for voltage drop from dimmer loss, a standard choke for noise reduction (reaching industry’s lowest levels on acoustic tests) and in-rush current, and a variety of circuit breakers for secondary circuit protection. Working with 12-volt, low-voltage down lights, the Q6 increases light output by 50% for brighter, more efficient lighting. The system also compensates for load size and resistance without increasing wire size. Three models of Q6 Transformers are offered: the Q6S, Q6M and Q6L.
The complete Q6 Series Power Supply Center of transformers are designed, engineered and manufactured In the USA and feature a Ten-Year Guarantee. All PSC’s are UL listed for damp locations and interior applications.
The Q6S Power Supply Center (PSC) crafted of 18-Gauge welded steel, is 8.63 inches long, 5.75 inches wide, and 3.1 inches tall, designed with four knockouts. It is offered in a white powder-coated finish, but can be custom-finished to meet exact specifications. The Q6S operates at a maximum lamp load range of 50 to 300 watts, with a 12VAC or 24VAC output, a 120VAC input (can also be ordered in 277V, 220, 230V 50 or 60Hz),input, and a PSC efficiency of 94%. This model is protected by a single magnetic circuit breaker.
The Q6M Power Supply Center (PSC) is crafted of 18-Gauge welded steel, and measures 11 inches in length, seven inches in width, and 4.5 inches in height, and is designed with six knockouts. It is available in a standard white powder-coated finish, but custom finishes are offered as well. The Q6M functions on a maximum lamp load of 500 to 750 watts, with a12VAC or 24VAC, a120VAC input (can also be ordered in 277V, 220, 230V 50 or 60Hz), and a PSC efficiency of 95%. This model is protected by up to five magnetic circuit breakers.
The Q6L Power Supply Center (PSC) is constructed of 16-Gauge welded steel and measures 15 inches in length, 10 inches in width, and 5.25 inches in height, with 11 knockouts. Its standard finish is white powder-coat, but custom finishes are available. The Q6L works with a maximum lamp load of 900-1800 watts, dual primary taps, and offers a12VAC or 24VAC, a 120VAC input (can also be ordered in 277V, 220, 230V 50 or 60Hz), and a PSC efficiency of 96%. Up to nine magnetic circuit breakers are used for secondary circuit protection on the Q6L.