Container ring of 100mm diameter and 500mm high, held between a bottom plate and a water cell. The water cell of 10mm diameter brass cylinder and the top and bottom plates of brass or any other non-corroding metal.
Each cell with collar is clamped in between a base plate and a top plate with the help of tension rods and nuts. The cell assembly is mounted on the stand. The top plate is provided with an inlet and air release vent and the base plate is provided with an outlet.
Complete with a pressure chamber fitted with a pressure regulator and pressure gauge 0-7 kg/cm sq. indicating the test pressure with single gauge without air compressor and foot pump.
Three cell Model.
Six cell Model