Welcome to HelloTrade!
I Want to Buy
Request for Quote
5 Yrs
Randstad House Crowhall Road, Nelson Park
Cramlington, England-NE231WH, United Kingdom+(44)-1670-735575
Contact Supplier

Sanding Down Wooden Floors

Next Product »
Yes! I am interested
FOB Price : Get Price


Remove all furniture, carpets and curtains from the room. Use a small chisel to detach the skirting boards, and knock in any protruding nail heads. Then vacuum clean the floor thoroughly.


If you only have to remove shoe marks and give the floor a consistent colour, all that is necessary is reconditioning. However, if the old coating has to be completely removed, then several sanding runs are required.


Reconditioning: The damaged coat of varnish has to be removed or matt sanded, in order to create a bond with the new varnish. It is sufficient if you sand over the parquet once with an orbital sander.


Sanding: Depending on the condition of the surface, two to four sanding runs with a sanding machine are required. Important: Sand mosaic parquet and square parquet diagonally across the grain; floorboard flooring should be sanded parallel to the run of the floorboards. Do not stop or change direction during sanding. Sand the corners and edges of a room before the last sanding run using edge and corner sanding machines. To do this, use a disc with a grit of 40 and for the subsequent fine sanding use a disc with a grit of 100.


Touch up cracks and joints before the last sanding run using joint filler. Then clean the floor very thoroughly


Share your requirement to get:
Competitive quotes
Wide range of suppliers
Convenience of buying
sending enquiry ....

unable to instantiate your call right now. please try after some time.


©Copyright HelloTrade.com