R.J. Thomas Manufacturing Co., Inc.

• 48” diameter (nom.) round top.

• 4 seats with 1 frame leg support under each seat. Your choice of four 10” x 40” (nom.) curved seats (Model T204), or four 16” (nom.) diameter round seats (Model T214). Depending on your choice of seats, this table will accommodate from 4 to 8 adults.

• The four frame legs are 2-3/8” OD steel pipe, in a bolt together design.

• Standard frame finish: hot dip galvanized after fabrication.

• Optional frame finish: powder coat finish in many color choices

• Models UTH (1-5/8" OD) and XTH (2-3/8" OD) are designed to provide more clearance under the picnic table top to allow most wheelchair armrests to fit under it for a closer approach. Higher frames provide an under table clearance of 30". Other table specifications same as UT and XT.

• Top is extended 2 ft. beyond seats on one or both ends. Wheelchair clearances exceed ADA guidelines with 30" wide, 30" under table (ground to bottom of table top), and 24" total knee and toe clearances (19" knee + 5" toe). Extended top is supported by a special diagonal brace and steel channel.

• Available lengths: 6 ft. seats and 8 ft. top (extended on one end) available with all top/seat material choices. 6 ft. seats and 10 ft. top (extended on both ends) or 8 ft. seats and 10 ft. top (extended on one end) available with lumber or aluminum.

Optional Bench Seat available on T300 and T400 Series: Replace the flat curved seats with contoured bench seats. Each bench offers comfortable seating room for two adults. The 45 inch wide seat is fabricated using ¾-#9 expanded steel or 14 ga. perforated steel. Each bench will be thermo-plastic coated to match the table top. These optional bench seats are available on T100, T300 and T400 round tables with thermo-plastic coated perforated or expanded steel top/seats.

Replace the flat curved seats with contoured bench seats. Each bench offers comfortable seating room for two adults. The 45 inch wide seat is fabricated using ¾-#9 expanded steel or 14 ga. perforated steel. Each bench will be thermo-plastic coated to match the table top. Optional bench seats are available on T100, T300 and T400 round tables with thermo-plastic coated perforated or expanded steel top/seats.

Round Park Tables are a perfect fit for malls, patios, pools, decks, restaurants, cafes, rec centers, common areas, schools, golf courses, hotels, streetscapes, … any casual place where people gather. Pedestal Round Tables offer the security of a permanent location and provide two different installation methods.

esigned for large group areas, shelter houses and anywhere you need extra seating capacity.

• Longer Picnic Tables – 10 or 12 ft. long – using 3 frame supports with additional diagonal braces and center channels for strength and durability. Top planks are attached in 5 locations!

• Frame specifications are identical to UT and XT Series Tables.
• Additional length and weight of these picnic tables provide extra level of security, a deterrent to unauthorized relocation or theft.

• Top/seat materials available: untreated or pressure treated #1 southern yellow pine or aluminum. Other species of lumber may be available when in stock. Please inquire.