Continuing the efforts of developing New Machines we have developed a new machine, Model: FFT-32 for Mechanical hydrogen Embrittlement Evaluation of plating/coating processes confirming to ASTM-E-519-06. This test method defines acceptance criteria for coating and plating processes that can cause hydrogen Embrittlement in steel. The machine consists of “C” frame with steady load application system at the centre. It is a lever system with manually adjustable loads. A screw and nut arrangement is provided at centre for holding the bottom end of sample and adjusting its vertical heights, the top end of sample and adjusting its vertical heights, the top end of sample is connected to the Loading Lever through a hanger. Dead loads are provided for loading the system in the range of 21kN to 32kN with a least count of 0.1kN.