Roy Engineered Products Company

Uses live steam or sterile fluid 316L stainless steel pump body standard Mechanical seals standard Easy to clean, disassemble Maximum pressure: 200 psi (13.8 bar)* Temperature range: -40° F. (-40° C.) to 300° F. (149° C.)
* Contact Application Engineering for higher pressure or higher

316L stainless steel body Large, rectangular inlet port Exclusive, non-galling Waukesha "88" alloy rotors Maximum pressure: 200 psi (13.8 bar)* Temperature range: -40° F. (-40° C.) to 300° F. (149° C.) * Contact Application Engineering for higher pressure or higher temperature applications.

High-efficiency rotary PD pump configured for a wide variety of industrial applications. Ideal for pumping low viscosity and non-lubricating fluids, for metering fluids, for gentle pumping of shear-sensitive fluids or for pumping high-viscosity fluids. Exclusive, non-galling Waukesha "88" alloy rotors standard A variety of mechanical seals and packing available Steel-it Paint standard Maximum pressure: 200 psi (13.8 bar) Temperature range: -40° F (-40° C) to 300° F (149° C). *For temperatures above 300°F (149°C),

Smooth flow Rotary PD Pump photo Gentle product handling Dry running ability with double seal Handles low and high viscosity products Simple maintenance Hygienic design Low sound level CIP capability standard Free draining pump housing Unique rotor attachment Robust construction Process flexibiltiy Single mechanical seals standard. Optional double mechanical seals also available Grease lubricated bearings for positive lubrication over speed, temperature.

Specifically designed for re-circulating service in reverse osmosis and other membrane systems, the 200MS Series multistage pumps offer lower start-up and run costs due to the high efficiency, two impeller design. These pumps produce a smooth, constant flow rate that reduces RO membrane fouling. They include many of the features of the 200 Series pumps, including strong investment cast impellers, low NPSH requirements and tighter running clearances. Rated up to 1250 psi maximum pump casing pressure when pumps are placed in series Maximum differential pressure 250 psi (based on water) Sanitary 3A construction for food and dairy processing; wet ends 316L stainless steel Low NPSHR investment cast impeller features 5 bladed, open design for easy CIP and gentle product handling Heavy duty cast iron bearing frame keeps shaft rigid and concentric for long seal and bearing life Balanced, water flush, double shaft seal standard

Specifically designed to pump "unpumpable" products; such as dough, meat emulsion, puddings and cheese, that cause bridging and cavitation in conventional pumps. Six models feature inlet ports ranging in size from 7.13 to 86.87 square inches. 316L stainless steel body Large, rectangular inlet port Exclusive, non-galling Waukesha "88" alloy rotors Maximum pressure: 200 psi (13.8 bar)* Temperature range:

The 200LR Series Liquid Ring Pump handles products with entrained air as well as maintaining its prime when otherpumps become air bound. This feature makes the 200LR the best choice for complete emptying of tanks and lines during normal processes or CIP. In addition to being an excellent CIP return pump, the 200LR can run in either direction, making it possible to fill or empty tanks with the same pump. The 200LR Series Offers: Less overhead space needed due to both suction and discharge ports being on the front cover. Same seal(s) as used in 200 Series Centrifugal Pumps. Reduced noise levels. Stainless steel motor adapter is standard. JM Motor and no stub shaft eliminates need to check TIR (Total Indicated Runout).