1. GENERAL DESCRIPTION
Gaskets, paints and adhesives stripper.
CRC Gasket Remover is a blend of non-chlorinated powerful solvents, formulated for the easy removal of gasket cement, paints, adhesives and sealants. It helps to protect equipment surfaces by eliminating damage caused by excessive scraping.
High penetrating power
Clings to vertical surfaces, ideal for fixed industrial equipment.
Softens and eases removal of conventional and formed in-place gaskets, gasket cements and sealants.
Excellent stripper for paints, varnishes and lacquers
Loosens carbon deposits
Dissolves tar, greases, dried oils, adhesives, resinous deposits, etc.
Avoids accidental and costly damage caused by excessive scraping.
Removal of : Gasket residues on : cylinder heads, crankcases, gearboxes water pump flanges,
Carbon deposits on : valve seats, cylinder heads, metal engine components.
Paints and coatings on : metals, stone, hard surfaces.
• Softens and eases removal of conventional and formed in-place gaskets, gasket cements and sealants.
• Loosens carbon deposits.
• Dissolves tar, greases, dried oils, adhesives, resinous deposits, etc.
• Clings very well to all surfaces, even vertical surfaces.
• All coating layers (that have to be removed) are softened and easy to remove by a jet of water.
• Can be used on all surfaces; metal, glass, wood, stone, etc.
• Avoids accidental and costly damage caused by excessive scraping.
Removal of: • Gasket residues on: cylinder heads crankcases gearboxes water pump flanges, • Carbon deposits on: valve seats cylinder heads metal engine components,
• Mastics • Putties • Sealants • Adhesives
Mask painted surfaces from over spray. Wear eye protection and non-porous (rubber) gloves.
Shake well or stir before application and apply a thick film on area to be treated.
Allow product to work for 10-20 minutes. Remove residues with a rag, stiff bristled brush or putty knife. Repeat application if necessary.
Clean treated surface with a solvent cleaner (CRC Fast Dry Degreaser, CRC Industrial Degreaser, ...) to remove waxy product film.
Test before use on plastics or rubber. Do not use on energised equipment.
Use only in well ventilated areas. A safety data sheet (MSDS) according EU93/112 is available for all CRC products.
5. TYPICAL(*) PRODUCT DATA
Appearance : viscous opaque liquid
Specific gravity (@ 20°C) : 0,92
Boiling range (solvents) : 40-200°C
Freezing point : < -20°C
Flash point (closed cup) : < -0°C
pH : neutral
Viscosity : 700-1500 mPa.s (thixotropic)
Kauri-Butanol value (solvents) : > 120
Vapour density (solvents, vs. air = 1) : > 2
Non-volatile content : 1,5% wt