Noryl® modified PPO (Polyphenylene Oxide - Styrene) is an alloy of PPO and styrene. It is considered an ideal engineering plastic choice due to excellent mechanical, thermal and electrical properties combined with good hydrolytic stability over a wide range of temperature and humidity. Noryl is widely used for electrical and structural components since it has excellent insulating properties, flame resistance and self-extinguishing properties (UL – 94) V – 0 @ 0.240” thickness and dimensional stability over a wide range of service temperatures. It is often selected for fluid handling applications since it has low moisture absorption and excellent strength and stiffness. Because of its alloy matrix composition, it is also one of the few non-metallic materials which can be readily electroplated (after an electroless plating surface has been applied using a selective etching process).It is easy to fabricate, paint, and glue. It may be used continuously at temperatures in excess of 110°C.
Electrical insulators and components, aircraft instrumentation, shafts, gear wheels, spacer, pump, valve and fittings, water softener valves, water pump components, surgical instruments, vaporizer and scrubber parts, plated and vacuum metallized parts, manifolds, surgical instruments, scientific & analytical instrument controls.
Automotive, aircraft and aerospace, electrical and electronics, food processing, telecommunications, pumps & valves.
· Partial resistant to petroleum products
· Sensitive to Organic solvents, Alcohol, Acetone, Ethyl acetate etc.
· Round rods : 5 – 200 mm
· Plates : 5 – 50 mm thickness
· Tubes on request