Fatigue Testing Machine - Machine is used to test the fatigue strength of materials and to draw S-N diagram ideal equipment for Technical Institutions, Research Institutes, and Laboratories etc. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 RPM by a motor. A complete cycle of reversed stresses in all fibers of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirements of International / Indian Standards
Light weight, compact size, simple design Table model, no need of foundation
Simple lever system for changing load
Accurately calibrated as per IS 5075 Calibration in Nm available on request.
we are leading supplier & wholeseller of Fatigue Testing Machine