Roll Crusher - It comprises of two hardened alloy steel rollers with 100 mm. faces and 250 mm diameters. The rollers are fitted to a steel shaft and are mounted on heavy duty gunmetal bearings. The outside bearings are provided with heavy duty compression springs, which help in increasing the space between the rolls, when a piece of material cannot be crushed. Square threaded holts are provided to adjust the gap between the rolls. The drive is by a heavy duty motor, through ‘V’ belts to a set of gears and further to the rollers. A hopper is provided for feeding the material. The whole arrangement is mounted on a fabricated steel frame. Supplied complete with a 3.0 H.P. motor, and starter following sizes available.
(a) Size : 4” x 8” with motor 3 HP, 3PH Feed 10mm Output –Below 2mm Rs.112500/-
(b) Size : 4” x 10” with motor 3 HP, 3PH Feed 12mm Output –Below
(c) Size : 6” x 10” with motor 3 HP, 3PH Feed 15mm Output –Below 2mm Rs.187500/-
(d) Size : 6” x 12” with motor 5 HP 3PH Feed 17mm Output –Below 2mm Rs.245500/-