WOER air conditioner tube set adopt Resistance Welding to effect seamless. 4Mpa air tightness test, no distortion. Burst pressure ≥13 MPa, no leakage. The leakage rate in weld joint is less than 10ppm. Compared to other Cu-Al connection pipe set suppliers, WOER air conditioner tube set has higher quality and more competitive prices. Random length of our Air conditioner tube set is available. There are 3 types of insulation cottons are available from WOER, economical type (in grey), standard type (in black) and luxury type (in white).
WOER Technology Advantage:
1. Welding: With resistance welding technology, WOER Cu-Al connection pipe is tested & approved by State Key Laboratory of CONNECTING TECHNIC CENTER of HARBIN INSTITUTE OF TECHNOLOGY http://en.hit.edu.cn/. Our Cu-Al connection pipe performs very well during the test of Pull Off, Pressure and Bending, NO not good,Burst Pressure ≥13 MPa;
2. Inclusive Pipe End Expansion Technology【WOER patent】: When ID≤3.2mm in size of Ø 6.35 air conditioner pipe set, there would come out block phenomenon occasionally. but WOER company adopt Pipe End Expansion technology to ensure the ID of the pipe ≥3.3mm, which can meet the requirement of the air conditioner pipe set very well and avoid block phenomenon;
3. Sealing accessories protection【WOER patent】: WOER Air conditioner tube set has Hot Melt Adhesive Sleeve(exclusive tech) in the point of weld, which would adhere the WOER Air conditioner tube (i.e. heat shrink tubing) and Cu-Al connection pipe tightly, thus isolate the moisture and prevent corrosion completely.