The newly redesigned 1970 Series THERMOPULSE Hot Melt Systems consists of a 2.5 gallon (20 lbs.) heated reservoir, with a DC motor driven positive displacement gear pump. The speed of the gear pump drive motor is controlled by an adjustable potentiometer, thereby increasing or decreasing pump output as required. The system is suitable for use with up to four (4) ELECTROMATIC applicator heads with externally heated hoses.
Each gun, hose and tank/pump area of the system includes an RTD temperature sensor, which is used in conjunction with the system temperature controllers. The controllers are adjustable over a range of 100 to 450ºF. An externally visible digital read-out is provided to monitor/set each zone, and a "Scan" mode is supplied, which automatically scans through each zone, continuously displaying zone temperatures.