CENTRALISED LUBRICATION SYSTEM
Increase in the Bush / bearing and Pin Life
Reduced Down time due to periodic lubrication.
Increase in productivity as the machine is well lubricated and kept.
This is a progressive type of system i.e.) the output of the system will be one after the other.
This progressive system is advantageous in fault finding, if one Grease Point is blocked the next will not work and the complete system stops.
A cycle Indication Limit Switch can be provided to ensure that the lube cycle had occurred and all the bearings have been greased.
In any case the cycle indication indicates non completion of cycle due to any bush or line block, an additional feature of having performance indicators help in identifying which line/bush is faulty.
Any main line cut from the pump can also be easily identified by the above said method as the cycle indicator pin will not work and limit indicates non-completion of cycle
Precise quantity of grease can be fed at the required Periodic interval.
Minimum operating pressure– 20 bar
Air trap does not affect the working of distributors in the progressive system. It can be easily removed.
No springs, O-rings and other wear parts. Only piston sliding on the bores. Very Easy Maintenance.
This system can be operated with help of a manual pump, so in case of any pump faults or any urgency the system can be manually lubricated.